Untitled Document

Course Description
This package contains the OSHAcampus 10 Hour Construction Safety Certification Training Course. The 10 Hour Construction Industry Training Program is intended to provide an entry level construction worker's general awareness on recognizing and preventing hazards on a construction site. OSHAcampus recommends Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will be mailed an OSHAcampus 10-Hour Construction Certification Wallet Card within 2-3 days.

You will find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player. Other reference materials are available from the OSHA website; please visit www.osha.gov.

As you proceed, please be aware of the help that is available to you for any problems you may come across as you take the course. If you are having technical difficulties with the course, please call or email the technical support team at 888-360-TRNG. For content related questions please contact our Trainers at oshatrainer@360training.com. For procedure related questions relating to inquiries about prerequisites, post course completion procedures, or completion cards please contact customer support 888-360-TRNG.

When taking this course please be aware of the time limits on both your login session and the course itself. For your login session, please feel free to take as long as you wish at any given time, but be aware that if you remain idle (staying on the same page) for 15 minutes then you will be logged out of the session and you will have to log in and rejoin the course where stopped previously.

As for the course itself, please remember that you have three months from the time you start this course to complete it in order to receive credit. After three months, your account will expire and you will be required to purchase the course again if you wish to complete it.

At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your training.

Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your training in an online format.

Course Duration:
10 Hours

Course Outline:

Orientation
Module 1: Introduction to OSHA and the OSH Act
Module 2: General safety and Health Provisions
Module 3A: Health Hazards: Hazard Communication
Module 3B: Health Hazards: Hazardous Materials
Module 4: Cranes and Rigging
Module 5: Focus Four: Electrical Safety
Module 6: Struck- By and Caught in Between
Module 7: Fall Protection
Module 8: Personal Protective Equipment
Module 9: Hand and Power tools
Module 10: Scaffolds
Module 11: Stairways and Ladders
Final Exam

Who Should Take the Course?

Entry Level Construction Workers.
Trainees must be within the jurisdiction (US Postal Code)

Why Are Customers Taking the Course?

Employer Requirement
State Requirement
Nevada Effective January 1, 2010
Missouri Effective August 28, 2009
New York Effective July 2008
Connecticut (Requirement Specific to Certain Kinds of Job Sites)

Subject Matter Expert Information

Luis Quintanar is a bilingual safety professional fluent in English, and Spanish conducting over 300 courses, job site specific plans, hazard assessments, job hazard analysis, and regulatory aimed audits for the construction, oil & gas, transportation, energy services and general industries.

Luis holds over 300 training certifications in the following areas :

OSHA / EPA / RCRA / CERCLA / NIOSH / ANSI / IATA / IMDG / CTPAT / DOT

OSHA 500 Construction Outreach Trainer - Training Certification in Occupational Safety and Health Standards for Construction Industry.

OSHA 501 OSHA Authorized General Industry Trainer - Trainer Certification in Occupational Safety and Health Standards for General Industry.

10 Hour Construction Safety Certification

Course Description This package contains the OSHAcampus 10 Hour Construction Safety Certification Training Course. The 10 Hour Construction Industry Training Program is intended to provide an entry level construction worker's general awareness on recognizing and preventing hazards on a construction site. OSHAcampus recommends Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will be mailed an OSHAcampus 10-Hour Construction Certification Wallet Card within 2-3 days. You will find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player. Other reference materials are available from the OSHA website; please visit www.osha.gov. As you proceed, please be aware of the help that is available to you for any problems you may come across as you take the course. If you are having technical difficulties with the course, please call or email the technical support team at 888-360-TRNG. For content related questions please contact our Trainers at oshatrainer@360training.com. For procedure related questions relating to inquiries about prerequisites, post course completion procedures, or completion cards please contact customer support 888-360-TRNG. When taking this course please be aware of the time limits on both your login session and the course itself. For your login session, please feel free to take as long as you wish at any given time, but be aware that if you remain idle (staying on the same page) for 15 minutes then you will be logged out of the session and you will have to log in and rejoin the course where stopped previously. As for the course itself, please remember that you have three months from the time you start this course to complete it in order to receive credit. After three months, your account will expire and you will be required to purchase the course again if you wish to complete it. At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your training. Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your training in an online format. Course Duration: 10 Hours Course Outline: Orientation Module 1: Introduction to OSHA and the OSH Act Module 2: General safety and Health Provisions Module 3A: Health Hazards: Hazard Communication Module 3B: Health Hazards: Hazardous Materials Module 4: Cranes and Rigging Module 5: Focus Four: Electrical Safety Module 6: Struck- By and Caught in Between Module 7: Fall Protection Module 8: Personal Protective Equipment Module 9: Hand and Power tools Module 10: Scaffolds Module 11: Stairways and Ladders Final Exam Who Should Take the Course? Entry Level Construction Workers. Trainees must be within the jurisdiction (US Postal Code) Why Are Customers Taking the Course? Employer Requirement State Requirement Nevada Effective January 1, 2010 Missouri Effective August 28, 2009 New York Effective July 2008 Connecticut (Requirement Specific to Certain Kinds of Job Sites) Subject Matter Expert Information Luis Quintanar is a bilingual safety professional fluent in English, and Spanish conducting over 300 courses, job site specific plans, hazard assessments, job hazard analysis, and regulatory aimed audits for the construction, oil & gas, transportation, energy services and general industries. Luis holds over 300 training certifications in the following areas : OSHA / EPA / RCRA / CERCLA / NIOSH / ANSI / IATA / IMDG / CTPAT / DOT OSHA 500 Construction Outreach Trainer - Training Certification in Occupational Safety and Health Standards for Construction Industry. OSHA 501 OSHA Authorized General Industry Trainer - Trainer Certification in Occupational Safety and Health Standards for General Industry.