This package includes the OSHAcampus 30 Hour General Certification Training. The 30 Hour General Safety Training course is a comprehensive safety program designed for anyone involved in the general industry. Specifically devised for safety directors, foremen, and field supervisors; the program provides complete information on OSHA compliance issues. OSHAcampus recommends Training Programs as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. General Industry workers must receive additional training, when required by OSHA standards, on specific hazards of the job. Upon successful completion of the course, participants will mailed an OSHAcampus 30-Hour General Industry course completion card within 2-3 days. The 30 hr General Industry Online Course is NOT equivalent to the OSHA 510 or 511 courses and will not meet the course prerequisites to take the OSHA 500 or OSHA 501 courses.

You will find supplementary materials available for download by clicking the “Materials” tab on the menu located within the course player. Other reference materials are available from the OSHA website; please visit www.osha.gov.

Key Features:

• The official OSHAcampus Certification!
• Wallet cards mailed out in 2-3 days vs. 4-6 weeks.
• Unlimited quiz attempts and no course lock outs.
• Study materials available in Online format.

As you proceed, please be aware of the help that is available to you for any problems you may come across as you take the course. If you are having technical difficulties with the course, please call or email the technical support team at 888-360-TRNG. For content related questions please contact our Trainers at [email protected] For procedure related questions relating to inquiries about prerequisites, post course completion procedures, or completion cards please contact customer support 888-360-TRNG.

When taking this course please be aware of the time limits on both your login session and the course itself. For your login session, please feel free to take as long as you wish at any given time, but be aware that if you remain idle (staying on the same page) for 15 minutes then you will be logged out of the session and you will have to log in and rejoin the course where stopped previously.

As for the course itself, please remember that you have six months from the time you start this course to complete it in order to receive credit. After six months, your account will expire and you will be required to purchase the course again if you wish to complete it.

At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your training.

Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your training in an online format.

Course Duration:
30 Hours

Course Outline:

• Orientation
• Module 1A: Introduction to OSHA and the OSH Act
• Module 1B: Basic Safety Orientation
• Module 2: Walking & Working Surfaces
• Module 3: Emergency Action Plan
• Module 4: Hazardous Materials
• Module 5: Hazwoper
• Module 6: Personal Protective Equipment
• Module 7: Confined Spaces & Permit Required Confined Spaces
• Module 8: Lockout/Tagout
• Module 9: Materials Handling & Storage
• Module 10: Machine Guarding Safety
• Module 11: Welding, Cutting, and Brazing
• Module 12: Electrical Safety
• Module 13: Hazard Communication
• Module 14: Hazardous Substances & Industrial Hygiene
• Module 15: Bloodborne Pathogens
• Module 16: Record Keeping & Reporting
• Module 17: Workplace Violence
• Module 18: Safety and Health Programs
• Module 19: Ergonomics
• Module 20: Hazards of Asbestos in the Workplace
• Module 21: Lead Safety in the Workplace
• Module 22: Ionizing and Non-Ionizing Radiation Safety
• Module 23: Formaldehyde Awareness
• Module 24: Process Safety Management of Highly Hazard Materials
• Final Exam

Who Should Take the Course?

• Entry Level General Industry Workers
• Industries include but not limited to: Health Care, Manufacturing, Warehousing, Distribution, Retail

Why Are Customers Taking the Course?

• Employer Requirement

Subject Matter Expert Information

Bio for Robert J. Aquadro, CSP

Bob has over thirty years of experience in achieving world class safety and health performance. Some of his major accomplishments include attaining OSHA Voluntary Protection Program STAR status and ISO 9002 certification. He helped lead a manufacturing plant to over 4 million hours without a recordable injury and a construction project to over 1 million hours without a recordable injury. He has successfully worked in a variety of industries from semiconductors and petrochemical plants to off shore construction projects both domestically and internationally.