This package contains the OSHA 10 Hour Construction Industry Outreach Course and the OSHA 10 Hour Construction Industry Study Guide. The OSHA 10 Hour Construction Industry Outreach Training Program is intended to provide an entry level construction worker's general awareness on recognizing and preventing hazards on a construction site. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 10-Hour Construction Outreach DOL course completion card within 4-6 weeks.
You will find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player. Other reference materials are available from the OSHA website; please visit www.osha.gov.
As you proceed, please be aware of the help that is available to you for any problems you may come across as you take the course. If you are having technical difficulties with the course, please call or email the technical support team at 888-360-TRNG. For content related questions please contact our Outreach Trainers at outreach-trainer@360training.com. For procedure related questions relating to inquiries about prerequisites, post course completion procedures, or completion cards please contact customer support 888-360-TRNG.
When taking this course please be aware of the time limits on both your login session and the course itself. For your login session, please feel free to take as long as you wish at any given time, but be aware that if you remain idle (staying on the same page) for 15 minutes then you will be logged out of the session and you will have to log in and rejoin the course where stopped previously.
As for the course itself, please remember that you have six months from the time you start this course to complete it in order to receive credit. After six months, your account will expire and you will be required to purchase the course again if you wish to complete it.
At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your outreach training.
Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your outreach training in an online format.
Course Details
Course Credit
10 Hours
Course Outline:
- Orientation
- Module 1: Introduction to OSHA and the OSH Act
- Module 2: General safety and Health Provisions
- Module 3A: Health Hazards: Hazard Communication
- Module 3B: Health Hazards: Hazardous Materials
- Module 4: Cranes and Rigging
- Module 5: Focus Four: Electrical Safety
- Module 6: Struck- By and Caught in Between
- Module 7: Fall Protection
- Module 8: Personal Protective Equipment
- Module 9: Hand and Power tools
- Module 10: Scaffolds
- Module 11: Stairways and Ladders
- Final Exam
Who Should Take the Course?
- Entry Level Construction Workers
- Trainees must be within the OSHA jurisdiction (US Postal Code)
Why Are Customers Taking the Course?
- Employer Requirement
- State Requirement
- Nevada Effective January 1, 2010
- Missouri Effective August 28, 2009
- New York Effective July 2008
- Connecticut (Requirement Specific to Certain Kinds of Job Sites)
Subject Matter Expert Information
Luis Quintanar is a bilingual safety professional fluent in English, and Spanish conducting over 300 courses, job site specific plans, hazard assessments, job hazard analysis, and regulatory aimed audits for the construction, oil & gas, transportation, energy services and general industries.
Luis holds over 300 training certifications in the following areas:
OSHA / EPA / RCRA / CERCLA / NIOSH / ANSI / IATA / IMDG / CTPAT / DOT
OSHA Certification # 500 - Trainer Certification in Occupational Safety and Health Standards for Construction Industry.
OSHA Certification # 501 - Trainer Certification in Occupational Safety and Health Standards for General Industry.
Testing: All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.
NEW! OSHA 10-Hour Construction Outreach Study Guide (PDF)! This new 75 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card. The Study Guide will assist you throughout the online course and can also be used as a future reference manual.
Time to completion: Once you enroll in the OSHA 10 Hour Construction Outreach Training course you will have 6 months to successfully complete the course and the survey. If you do not complete the course and survey in 6 months you will not receive a certificate for course completion.
Need a Certificate Now?
Passing participants will receive an OSHA 10-Hour Construction Outreach DOL course completion card within 4-6 weeks.
In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.
The OSHA Ten Hour Construction Outreach Training course has been reviewed and accepted by OSHA for online distribution.
OSHA 10 Hour General Industry Outreach Training Course
| OUTREACH STUDY GUIDES AVAILABLE! |
|
|
|
The Outreach Study guides can help ensure that students understand and retain valuable information.
The Study Guides can be used as reference material to help workers identify potential hazards in the workplace. |
|
| |
 |
|
|
|
This package contains the OSHA 10 Hour General Industry Training with the OSHA 10 Hour General Industry Training Study Guide. The 10-hour General Industry Outreach Training Program is intended to provide an entry level worker's general awareness on recognizing and preventing hazards in a general industry setting. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 10-Hour General Industry Outreach DOL course completion card within 4-6 weeks.
You will find supplementary materials available for download by clicking the "Materials" tab on the menu located within the course player. Other reference materials are available from the OSHA website; please visit www.osha.gov.
As you proceed, please be aware of the help that is available to you for any problems you may come across as you take the course. If you are having technical difficulties with the course, please call or email the technical support team at 888-360-TRNG. For content related questions please contact our Outreach Trainers at outreach-trainer@360training.com. For procedure related questions relating to inquiries about prerequisites, post course completion procedures, or completion cards please contact customer support 888-360-TRNG.
When taking this course please be aware of the time limits on both your login session and the course itself. For your login session, please feel free to take as long as you wish at any given time, but be aware that if you remain idle (staying on the same page) for 15 minutes then you will be logged out of the session and you will have to log in and rejoin the course where stopped previously.
As for the course itself, please remember that you have six months from the time you start this course to complete it in order to receive credit. After six months, your account will expire and you will be required to purchase the course again if you wish to complete it.
At the end of each module, you will be given a 10 question module quiz. You must score at least 70% on each module quiz to move forward in the course. You will be given up to three opportunities to pass each module quiz. Failure to successfully pass the quiz will result in being locked out of the course and not allowed to continue with an online training format for your outreach training.
Once you have successfully completed all of the modules, you must pass a final exam to receive full credit for the course. The exam is 20 questions long and will test your knowledge on information covered throughout the course. You must make a score of at least 70% to pass this course. You will be given up to three opportunities to pass the final exam; if you do not pass it after three tries, you will be locked out of this course will no longer be able to take your outreach training in an online format.
Course Details
Course Credit:
10 Hours
Course Outline:
- Orientation
- Module 1: Introduction to OSHA and the OSH Act
- Module 2: Walking & Working Surfaces
- Module 3: Emergency Action Plan
- Module 4: Hazardous Materials
- Module 5: Personal Protective Equipment
- Module 6: Machine Guarding Safety
- Module 7: Electrical Safety
- Module 8: Hazard Communication
- Module 9: Hazardous Substances & Industrial Hygiene
- Module 10: Safety and Health Programs
- Final Exam
Who Should Take the Course?
- Entry Level General Industry Workers
- Industries include but not limited to: Health Care, Manufacturing, Warehousing, Distribution, Retail
- Trainees must be within the OSHA jurisdiction (US Postal Code)
Why Are Customers Taking the Course?
Subject Matter Expert Information
BIO FOR ROBERT J. AQUADRO, CSP
Bob has over thirty years of experience in achieving world class safety and health performance. Some of his major accomplishments include attaining OSHA Voluntary Protection Program STAR status and ISO 9002 certification. He helped lead a manufacturing plant to over 4 million hours without a recordable injury and a construction project to over 1 million hours without a recordable injury. He has successfully worked in a variety of industries from semiconductors and petrochemical plants to off shore construction projects both domestically and internationally.
Bob is an accomplished trainer, auditor and developer of safety and health programs. He has coauthored several papers which he presented at American Society of Safety Engineers Professional Development Conferences. He is currently President of Aquadro Safety Consulting developing safety and health leadership to produce world class safety cultures.
Course Pre-Requisite: None
Testing:All module quizzes require a score of 70 to proceed forward in the course. The final exam also requires a minimum score of 70 to receive a certificate of completion. The final exam may be taken three times if necessary.
NEW! OSHA 10-Hour Construction Outreach Study Guide (PDF)! This new 75 page Study Guide will ensure you are ready to take the final exam to receive your OSHA DOL Card. The Study Guide will assist you throughout the online course and can also be used as a future reference manual.
Time to completion: Once you enroll in the OSHA 10 Hour general Outreach Training course you will have 6 months to successfully complete the course and the survey. If you do not complete the course and survey in 6 months you will not receive a certificate for course completion.
Need a Certificate Now?
Passing participants will receive an OSHA 10-Hour General Outreach DOL course completion card within 4-6 weeks.
In order to receive your OSHA Outreach DOL course completion card you must complete the survey at the end of the course.
The OSHA Ten Hour General Industry Outreach Training course has been reviewed and accepted by OSHA for online distribution.
ABIH Approval#: 08-372
|
